Reversible air-water heat pump
with natural refrigerant

Compact and flexible

Efficiency for changing tasks

The reversible air-water heat pumps impress with their efficient performance in a wide range of operating conditions. They can heat buildings or systems in winter, for example, and cool them in summer, thus reliably covering varying base loads throughout the year. Thanks to their low-noise design, they are also suitable for outdoor installation in densely built-up areas.

45 KW
450 KW

Our electric propane heat pumps
deliver optimum performance for every application requirement.

Naturally! Propane

With an electric propane heat pump with natural refrigerant
refrigerant, you are legally secure in the long term.

Cost- & resource-efficient

YANMAR has always stood for highly efficient machines,
and our electric propane heat pumps continue this tradition.
In practical use, this means low energy
consumption and therefore low operating costs.

Simple maintenance

Operation and maintenance are carried out exclusively from the front and rear,
All components requiring operation and maintenance are easy to reach.
The condenser is very easy to clean via an inspection flap.

Comprehensive control

Our in-house developed controller enables
continuous recording of all operating data – and
therefore convenient remote diagnosis and monitoring.

Factory-tested quality

Before delivery, each machine undergoes a
complete function test on the in-house test bench.

Product overview

Performance for every need

Product range

The right size for every requirement
Y-VHA-P1.52.2-HP -
Y-VHA-P1.59.2-HP
Y-VHA-P1.71.2-HP -
Y-VHA-P2.142.2-HP
Y-VHA-P2.168.2-HP -
Y-VHA-P2.229.2-HP
Y-VHA-P2.252.2-HP -
Y-VHA-P2.308.2-HP
Y-VHA-P2.336.2-HP -
Y-VHA-P2.456.2-HP
Y-VHA-P2.518.2-HP -
Y-VHA-P2.616.2-HP
Y-VHA-P1.52.2-HP – Y-VHA-P1.59.2-HP
Reversible air-water heat pump
Y-VHA-P1.71.2-HP – Y-VHA-P2.142.2-HP
Reversible air-to-water heat pump
Y-VHA-P2.168.2-HP – Y-VHA-P2.229.2-HP
Reversible air-to-water heat pump
Y-VHA-P2.252.2-HP – Y-VHA-P2.308.2-HP
Reversible air-to-water heat pump
Y-VHA-P2.336.2-HP – Y-VHA-P2.456.2-HP
Reversible air-to-water heat pump
Y-VHA-P2.518.2-HP – Y-VHA-P2.616.2-HP
Reversible air-to-water heat pump

Components

at a glance

Remote monitoring
Remote monitoring and parameterisation of the heat pump via the Internet.

Hydraulic module
Optional hydraulic module as housing extension with single or double pump, optionally with buffer tank.

Inverter
Inverters for the compressors to maximize the modulation capacity and the average seasonal efficiency of the unit.

Reversible finned coil condenser
Finned coils with internally lined copper pipes and aluminum fins with hydrophilic treatment with low interval volume to minimize refrigerant charge and maximize heat exchange to increase the efficiency of the refrigeration circuit.

Plate heat exchanger
Generously dimensioned brazed plate heat exchangers optimised for R290 with high performance on the refrigerant side and reduced pressure losses on the water side.

Switch cabinet
The control panel not only complies with the strictest European standards, but is even based on higher industrial standards.

Gas sensor
R290 gas sensor for monitoring the compressor chamber and activating the safety chain in the event of an accident.

Fans
Axial fans with directly coupled EC motor with maximum efficiency.

Compressor
Efficient semi-hermetic reciprocating compressors specially developed and optimised for applications with R290.

Remote monitoring and parameterisation of the heat pump via the Internet.
Optional hydraulic module as housing extension with single or double pump, optionally with buffer tank.
Inverters for the compressors to maximize the modulation capacity and the average seasonal efficiency of the unit.
Finned coils with internally lined copper pipes and aluminum fins with hydrophilic treatment with low interval volume to minimize refrigerant charge and maximize heat exchange to increase the efficiency of the refrigeration circuit.
Generously dimensioned brazed plate heat exchangers optimised for R290 with high performance on the refrigerant side and reduced pressure losses on the water side.
The control panel not only complies with the strictest European standards, but is even based on higher industrial standards.
R290 gas sensor for monitoring the compressor chamber and activating the safety chain in the event of an accident.
Axial fans with directly coupled EC motor with maximum efficiency.
Efficient semi-hermetic reciprocating compressors specially developed and optimised for applications with R290.
Request our product documents here!

Choose your personal contact for your region:

Or write to us at:

    YANMAR Energy System Europe